First, check to make sure your unit has power. If not, reset any tripped circuit breakers and replace any blown fuses. If your water is hot, but the tank has a rusty appearance or smells, it may be time for an anode rod replacement. Contact Water Heater Repair Aurora CO now!
This helps prevent corrosion and can save you money on energy costs.
If your water isn’t as hot as it usually is, there’s a good chance that the water heater needs to be repaired or replaced. Something may be wrong with the thermostat, but it could also mean a problem with the dip tube. This tube transfers cool water from the top of the tank to the bottom, where it can be reheated. A damaged dip tube can cause cool water to mix with the hot, reducing your overall water temperature.
Another common sign that your water heater isn’t working properly is if you have to turn your shower dial up higher and higher to get the same hot water. This is a sign that your water heater is working harder than usual, which means it’s using more energy. It might be time to hire a plumber to replace the water heater.
Other warning signs include a strange smell or discoloration in your water. The odor may be caused by a rotting anode rod, or the discoloration may result from minerals or other substances in your water. If you notice a foul smell or strange color in your water, drain your water heater and see if the problem goes away.
Lastly, if you’re hearing loud banging or rumbling noises from your water heater, it’s time to call in a plumber. This is a sign that the tank is beginning to rust or that it’s developing a leak.
It’s also important to note that older water heaters are more likely to break down than newer ones. If your water heater is nearing the 15-year mark, it might be wise to replace it instead of trying to fix it. The cost of a new water heater is typically less than the repair costs associated with an older model.
Over time, your building’s water heater could accumulate a fine layer of sediment in its tank from the minerals and other particulate matter possibly present in the city or well-water supply. If left unaddressed, this can wreak havoc with your water-using appliances and result in costly repair and replacement expenses. Fortunately, there are certain warning signs that you can watch out for that will alert you to sediment in your water heater’s tank.
One of the first indicators that you may have a sediment buildup in your water heater is a puddle or pool around the base of your hot water tank. If you see this, shut off the hot water heater and drain it by connecting a hose to your water tank’s drainage valve and draining it onto a light-colored patio or similar location that won’t be damaged by the hot water escaping from the hose during the flushing process. If you are unsure about how to drain your water heater safely and thoroughly, it’s best to contact a professional plumber for assistance.
Another common indicator of sediment in your water heater is a sudden rise in energy bills. When a water heater is clogged, it has to work harder to heat the water, which leads to increased energy consumption. Lastly, sediments can cause the storage tank to rust due to the reaction between oxygen and the sediment particles.
If you notice discolored or rusty water flowing from your showerhead, this is another clear indication of sediment buildup within the tank. When rust is introduced into your hot water supply, it can contaminate it and lead to unpleasant tastes and smells.
You might also notice rumbling or popping noises from your water heater if there is a lot of sediment in the tank. As the sediment heats up and expands, it can agitate the walls of your water heater and irritate the gas or electric components of the appliance. If this continues, the tank may eventually rupture. If you notice any of these problems, call us right away for immediate help with water heater repairs and maintenance.
The area around your hot water heater should always be dry. If you notice puddles or dampness near your unit, cut off your water supply and call a plumber specializing in water heater repair. Whether the puddles are a leak, they can indicate a problem with your tank or a broken component, like the drain valve. Using a paper towel, test the area for moisture. If the puddles are evenly spread around your water heater, they’re likely condensation and not a sign of a faulty unit.
If you hear sounds like rumbling or popping, your water heater may leak. It could also be overheating due to a buildup of sediments that overheat the bottom of the tank. If left unchecked, this can lead to the tank cracking and a flooded home.
Water leaks can damage your home’s structure, but they can also hurt your wallet and cause health issues for you and your family. For instance, a leaking water heater can lead to mold growth, which will not only ruin your indoor air quality but also damage the surrounding surfaces and structures of your home.
Leaks can occur anywhere, and a small leak can quickly turn into a flooding issue. In addition to causing water damage, a leaking water heater can waste energy and lead to high utility bills.
Many homeowners don’t think much about their water heaters—as long as they work, they’re out of sight and out of mind. However, when your water heater breaks, it can destroy your entire routine and make life miserable for you and your family.
To avoid a cold shower, watching for these signs of a failing water heater is important. If you notice that your water heater isn’t heating, make sure the pilot light is lit and that there are no gas outages in your neighborhood. If the problem persists, it’s best to call a plumber specializing in water leak detection and repair. They’ll inspect your water heater, determine the cause, and fix it as soon as possible.
The rotten egg smell that occasionally comes from your hot water heater can be a sign that bacteria is eating away at your tank’s inner lining. This is most common in older, untreated well water systems. The odor results from naturally occurring ions in your water supply called sulfates that have a taste for stainless steel. As the sulfates snack on your metal tank, they transform into hydrogen sulfide gas. Hydrogen sulfide is the same foul-smelling vapor found in sewers, septic tanks, oil and gas wells, and volcanic eruptions.
This stinky odor can also be the result of a faulty anode rod. Anode rods are a sacrificial piece of metal that draws the minerals and corrosive buildup away from your tank’s lining so that the lining doesn’t rust. Unfortunately, some of the most popular anode rod materials — like aluminum and magnesium — also react with the sulfur ions in your water to produce that familiar rotten egg smell.
If you’re experiencing the rotten egg odor from your hot water heater, a professional can flush and sanitize your tank to eliminate the problem. They can also replace your anode rod with a more cutting-edge model that uses a zinc-aluminum alloy that doesn’t react with sulfates to produce hydrogen sulfide.
A sulfur smell or rotten egg odor from your hotwater can also be the sign of an electrical issue within your water heater. The electrical contact switches on the outside of your water heater can wear down over time and start to discharge continuously, causing hot spots that burn plastic parts inside your water heater.
If you notice this smell, it’s important to turn off your hot water heater immediately and then call a plumber for expert help. You’ll need to shut off the gas and open your windows and doors to let any remaining gas dissipate before you can safely reignite your pilot light. A professional can often replace the damaged switch and restore your water heater to normal function. If the odor is coming from your gas line, however, you’ll need to contact a gas company or emergency services for immediate assistance.